ZLA Logo
Table of Contents

Alias Guide — General Aliases Last updated: 2024-07-03

Last Trasnmitted Callsigns (CRC Only)



.h



.who



.ltx



.lasttx



Any of the above commands will display the last 5 callsigns (or last 4 and currenlty transmitting call sign) to have transmitted on your frequency in the chat window.



General



.rx - Ask the pilot if they are able to receive voice.



.resend - Ask the pilot to resend their flight plan.



.sidchart [sid codename] | .starchart [star codename] - Ask the pilot if they have charts for the procedure you specify.



.type | .equip | .typeequip - Ask the pilot for their type aircraft, equipment onboard, or both.



.depwx | .arrwx - Provide the wind and altimeter setting for the departure or arrival airport in the pilot's flight plan.



.info [code] [airport] - Provide the pilot with the given ATIS code at the airport you specify.



.newatis [code] [airport] - Use this with no aircraft selected to notify all pilots that the ATIS code has changed.



.vinfo [code] [airport] - Ask the pilot to verify they have the correct ATIS code at the airport specified.



.thanks | .ty - A longer message and a shorter message, respectively, to thank the pilot for flying before they log off or leave your airspace.



.dis - Shortcut for disregard.



.brb | .brbin [minutes] - Let pilots know you'll return shortly or in a number of minutes you specify.*



.back - Let pilots know when you've returned.*



.closing | .closingin [minutes] - Let pilots know you'll be closing in 15 minutes or in a number of minutes you specify.*



.closed | .closedu - Let pilots know that your position is now closed. The second alias lets pilots know they can switch to unicom.*



.closedho [controller ID] - Let pilots know that your position is closed and instruct them to contact the controller you specify.*



 



Handoffs



.ho [controller ID] - Hand the pilot to the specified controller.



.hou - Release the pilot from your frequency ("u" is alias shorthand for unicom).



.hodu - Let the pilot know that departure is offline and release them from your frequency.



.rem - Tell the pilot to remain on your frequency.



.lmatwr [direction] - For bravo and charlie tower controllers. Advise the pilot they are leaving your airspace in the specified direction, instruct them to squawk VFR, and release them from your frequency.



.lmadelta [direction] - For delta tower controllers. Same as above, but without the squawk instruction.



 



*Deselect any aircraft you have selected before using this alias.