.push | .pushtail [direction] - Instruct the pilot to push and start and advise ready for taxi. The second alias will instruct the pilot to push with their tail in the specified direction.

.txv [runway] [taxi route] - Instruct the pilot to taxi to the specified runway via the specified route. You may enter multiple taxiways for the route. The pilot will also be given the wind and altimeter setting.

.tx@v [runway] [intersection] [taxi route] - Same as above, but instruct the pilot to taxi to the specified runway at the specified intersection.

.txgv [taxi route] | .txpv [taxi route] - Instruct the pilot to taxi to the gate or to parking via the specified route.

.hs [runway/taxiway] | .xr [runway/taxiway] - Instruct the pilot to hold short of or cross the specified runway/taxiway.

Boundary Notifications

.bound [departure controller ID] [runway] [scratchpad code or departure procedure] - Send the specified departure controller a rolling boundary notification. The controller will be notified that the currently selected aircraft will be departing the specified runway and was cleared along the specified departure procedure.